Product Description

ASTM A193 B7 Round bar thread bar for high tensile bolts
ASTM A193 GR.B7 B16 B7M cold drawn steel bar QT steel bar
1.ASTM A193 GR.B7 QT cold drawn steel bar

QT steel bar Used in the manufacture of shafts, connecting rods, gears and bolts
Harden ability is better, High overall mechanical properties, good low temperature impact toughness, low notch sensitivity, with temper brittleness

2.Process for Steel round bar
Blast Furnance→ Molten Iron Pretreatment→Converter→LF→VD/RH→ContinuousCasting→Hot Rolling(KOCKS)→ Heat Treatment→ UT Inspection→Finish Product
EAF→LF→VD/RH→ Continuous Casting→Hot Rolling(KOCKS)→ Heat Treatment→ UT Inspection→ Finish Product.

3..ASTM A193 Gr.B7  Cold drawn steel bar Typical applications

Fastners,high strength bolts&nuts,thread rods

4.ASTM A193 Gr.B7 cold drawn steel bar main type and avaliable sizes
 

Round bars	5mm-130mm
Suqare bar	6*6mm-100*100mm
Flat bars	3mm*20mm-50mm*100mm
Hex bars	6mm-100mm
Bar Finsihe	Peeled, Cold Drawn, TurnedTurned & Polished, Centreless Ground

5.ASTM A193 Gr.B7   Cold drawn steel bar size tolerance

h9,h10,h11 or other tolerance according to client’s requirement

6.ASTM A193 Gr.B7  Cold drawn steel bar chemical composition(%)
 

Grade	C	Cr	Si	S	Mn	P	Mo
ASTM A193 Gr.B7	0.37 – 0.49	0.80 – 1.10	0.15 – 0.35	0.04 max	0.65 – 1.10	0.035	0.15 – 0.25

7.ASTM A193 Gr.B7 Alternative grade in different standard
 

GB	42CrMo
ASTM	4140
JIS	SCM440
DIN	1.7225

 

8.ASTM A193 Gr.B7 Typical Mechanical Properties

 

Grade	Tensile Strength Mpa	Yield Strength Mpa	Elongation %	Reduction %	-40ºCAkv2/J	Hardness
10.9	≥1040	≥940	≥9	≥48	≥50	HRC32-39
8.8	≥830	≥660	≥12	≥52	≥70	HRC23-34

9.Straightness: 1mm/m(max)
10. Steel bar Packing:
*Bars from different heats will not be mixed and dispatched.
*Bars will be bundles and securely metal strapped in 3 min places of the bar length and tagged properly.
*For further processing products such as cold drawn/peeled or heat treated goods, plastics bag wrapped or pallet loading is available according to customer’s demands.

11.Delivery time of steel bar:
7-10days of stock,30 days after order confirmed of new material

12.Payment term:TT or LC

13.Free sample:Yes

14.steel bar Inspection: Spectral Tested, Microstructure Tested,Hardness Test,Macrostructure Test,UT test

15.Our cold drawn factory equipments
We adopt advanced production technology and first-class processing equipments, such as heat treatment furnace, straightening machine, centerless grinding machine, polishing machine, as well as lathing and milling machine etc.

15.Our steel bar mill‘s certificates

ISO901&ISO.TS16949,ISO4001,OHSAS18001
Special Equipment Manufacturing License of P.R.C for pipeline plate,steel plate for boiler&Vessel;
ISO/TS16949 2009 for Manufacturing of Special steel;
Europe CE Mark Certificate;JIS MARK,KS MARK.

We have Largest inventory of ASTM A193 Gr.B7 Round Bar. ASTM A193 Gr.B7 Bars, ASTM A193 Gr.B7 Alloy Steel Round Bar Suppliers, ASTM A193 Gr.B7 Steel Bars Exporter in Turkey, ASTM A193 Gr F92 Threaded Bars, ASTM A193 Gr.B7 Round Bars Dealer in Egypt, ASTM A193 Grade B7 Steel Bar, A193 B7 Alloy Steel Black Bars Suppliers in Mumbai, India, Alloy Steel A193 B7 Bars, ASTM A193 Grade B7 Rods, ASTM A193 Grade B7 Alloy Steel Bar, Alloy Steel Gr B7 Bars Stockholder in Singapore, ASTM A193 Gr.B7 Alloy Steel Bar, ASTM A193 Alloy Steel B7 Bars, ASTM A193 Gr.B7 Square Bars Distributors in Malaysia, ASTM A193 A193 B7 Bars, ASTM A193 Gr.B7 Alloy Steel Hex Bars in Oman, ASTM A193 Gr.B7 Round Bars Suppliers, Chrome Moly Grade B7 Bar in Qatar, ASTM A193 Gr.B7 Bright Bars Stockist in Indonesia, Alloy Steel B7 Polished Bar in Jordan, Alloy Steel ASTM A193 Gr.B7 Rectangle Bar in South Africa, Alloy Steel B7 Rod Suppliers in Italy, We are india’s most trusted Manufacturer, Suppliers & Exporter of ASTM A193 Gr.B7 Alloy Steel Round Bars, ASTM A193 Gr.B7 Alloy Steel Rods are Available in Different Dimensions and Specifications in CHINA.

 

Screws and Screw Shafts

A screw is a mechanical device that holds objects together. Screws are usually forged or machined. They are also used in screw jacks and press-fitted vises. Their self-locking properties make them a popular choice in many different industries. Here are some of the benefits of screws and how they work. Also read about their self-locking properties. The following information will help you choose the right screw for your application.

Machined screw shaft

A machined screw shaft can be made of various materials, depending on the application. Screw shafts can be made from stainless steel, brass, bronze, titanium, or iron. Most manufacturers use high-precision CNC machines or lathes to manufacture these products. These products come in many sizes and shapes, and they have varying applications. Different materials are used for different sizes and shapes. Here are some examples of what you can use these screws for:
Screws are widely used in many applications. One of the most common uses is in holding objects together. This type of fastener is used in screw jacks, vises, and screw presses. The thread pitch of a screw can vary. Generally, a smaller pitch results in greater mechanical advantage. Hence, a machined screw shaft should be sized appropriately. This ensures that your product will last for a long time.
A machined screw shaft should be compatible with various threading systems. In general, the ASME system is used for threaded parts. The threaded hole occupies most of the shaft. The thread of the bolt occupy either part of the shaft, or the entire one. There are also alternatives to bolts, including riveting, rolling pins, and pinned shafts. These alternatives are not widely used today, but they are useful for certain niche applications.
If you are using a ball screw, you can choose to anneal the screw shaft. To anneal the screw shaft, use a water-soaked rag as a heat barrier. You can choose from 2 different options, depending on your application. One option is to cover the screw shaft with a dust-proof enclosure. Alternatively, you can install a protective heat barrier over the screw shaft. You can also choose to cover the screw shaft with a dust-proof machine.
If you need a smaller size, you can choose a smaller screw. It may be smaller than a quarter of an inch, but it may still be compatible with another part. The smaller ones, however, will often have a corresponding mating part. These parts are typically denominated by their ANSI numerical size designation, which does not indicate threads-per-inch. There is an industry standard for screw sizes that is a little easier to understand.

Ball screw nut

When choosing a Ball screw nut for a screw shaft, it is important to consider the critical speed of the machine. This value excites the natural frequency of a screw and determines how fast it can be turned. In other words, it varies with the screw diameter and unsupported length. It also depends on the screw shaft’s diameter and end fixity. Depending on the application, the nut can be run at a maximum speed of about 80% of its theoretical critical speed.
The inner return of a ball nut is a cross-over deflector that forces the balls to climb over the crest of the screw. In 1 revolution of the screw, a ball will cross over the nut crest to return to the screw. Similarly, the outer circuit is a circular shape. Both flanges have 1 contact point on the ball shaft, and the nut is connected to the screw shaft by a screw.
The accuracy of ball screws depends on several factors, including the manufacturing precision of the ball grooves, the compactness of the assembly, and the set-up precision of the nut. Depending on the application, the lead accuracy of a ball screw nut may vary significantly. To improve lead accuracy, preloading, and lubrication are important. Ewellix ball screw assembly specialists can help you determine the best option for your application.
A ball screw nut should be preloaded prior to installation in order to achieve the expected service life. The smallest amount of preload required can reduce a ball screw’s calculated life by as much as 90 percent. Using a lubricant of a standard grade is recommended. Some lubricants contain additives. Using grease or oil in place of oil can prolong the life of the screw.
A ball screw nut is a type of threaded nut that is used in a number of different applications. It works similar to a ball bearing in that it contains hardened steel balls that move along a series of inclined races. When choosing a ball screw nut, engineers should consider the following factors: speed, life span, mounting, and lubrication. In addition, there are other considerations, such as the environment in which the screw is used.

Self-locking property of screw shaft

A self-locking screw is 1 that is capable of rotating without the use of a lock washer or bolt. This property is dependent on a number of factors, but 1 of them is the pitch angle of the thread. A screw with a small pitch angle is less likely to self-lock, while a large pitch angle is more likely to spontaneously rotate. The limiting angle of a self-locking thread can be calculated by calculating the torque Mkdw at which the screw is first released.
The pitch angle of the screw’s threads and its coefficient of friction determine the self-locking function of the screw. Other factors that affect its self-locking function include environmental conditions, high or low temperature, and vibration. Self-locking screws are often used in single-line applications and are limited by the size of their pitch. Therefore, the self-locking property of the screw shaft depends on the specific application.
The self-locking feature of a screw is an important factor. If a screw is not in a state of motion, it can be a dangerous or unusable machine. The self-locking property of a screw is critical in many applications, from corkscrews to threaded pipe joints. Screws are also used as power linkages, although their use is rarely necessary for high-power operations. In the archimedes’ screw, for example, the blades of the screw rotate around an axis. A screw conveyor uses a rotating helical chamber to move materials. A micrometer uses a precision-calibrated screw to measure length.
Self-locking screws are commonly used in lead screw technology. Their pitch and coefficient of friction are important factors in determining the self-locking property of screws. This property is advantageous in many applications because it eliminates the need for a costly brake. Its self-locking property means that the screw will be secure without requiring a special kind of force or torque. There are many other factors that contribute to the self-locking property of a screw, but this is the most common factor.
Screws with right-hand threads have threads that angle up to the right. The opposite is true for left-hand screws. While turning a screw counter-clockwise will loosen it, a right-handed person will use a right-handed thumb-up to turn it. Similarly, a left-handed person will use their thumb to turn a screw counter-clockwise. And vice versa.

Materials used to manufacture screw shaft

Many materials are commonly used to manufacture screw shafts. The most common are steel, stainless steel, brass, bronze, and titanium. These materials have advantages and disadvantages that make them good candidates for screw production. Some screw types are also made of copper to fight corrosion and ensure durability over time. Other materials include nylon, Teflon, and aluminum. Brass screws are lightweight and have aesthetic appeal. The choice of material for a screw shaft depends on the use it will be made for.
Shafts are typically produced using 3 steps. Screws are manufactured from large coils, wire, or round bar stock. After these are produced, the blanks are cut to the appropriate length and cold headed. This cold working process pressudes features into the screw head. More complicated screw shapes may require 2 heading processes to achieve the desired shape. The process is very precise and accurate, so it is an ideal choice for screw manufacturing.
The type of material used to manufacture a screw shaft is crucial for the function it will serve. The type of material chosen will depend on where the screw is being used. If the screw is for an indoor project, you can opt for a cheaper, low-tech screw. But if the screw is for an outdoor project, you’ll need to use a specific type of screw. This is because outdoor screws will be exposed to humidity and temperature changes. Some screws may even be coated with a protective coating to protect them from the elements.
Screws can also be self-threading and self-tapping. The self-threading or self-tapping screw creates a complementary helix within the material. Other screws are made with a thread which cuts into the material it fastens. Other types of screws create a helical groove on softer material to provide compression. The most common uses of a screw include holding 2 components together.
There are many types of bolts available. Some are more expensive than others, but they are generally more resistant to corrosion. They can also be made from stainless steel or aluminum. But they require high-strength materials. If you’re wondering what screws are, consider this article. There are tons of options available for screw shaft manufacturing. You’ll be surprised how versatile they can be! The choice is yours, and you can be confident that you’ll find the screw shaft that will best fit your application.