Product Description

HangZhou CZPT Mechanical Seals Co., Ltd.

Add: Room 811, 8th Floor, CZPT Plaza, Xihu (West Lake) Dis. Street, Xihu (West Lake) Dis. District, HangZhou
 

AMX Series Magnetic Drive Centrifugal Pump

High-performance Magnetic Drive Pump

* High Lift Design, over 35M Lift, Stronger Cleaning Capacity

*Power: 0.37KW-3.75KW

* Corrosion Resistance

The pump body is made of high-corrosion-resistant materials such as high-aluminum ceramics, silicon carbide, polytetrafluoroethylene, carbon, and has no shaft seal and no leakage structure to ensure the safe delivery of most chemical liquids.

* Durable

The motors of the AMX series magnetic pumps are equipped with temperature literature caused by the overload.

* Easy to assemble and easy to maintain

The internal parts of the magnetic drive pump are standardized, and the structure is exquisite and high in performance. The parts can be easily replaced without any special tools during the disassembly and assembly process and maintenance is very easy.

RUIXIAN PUMP CHINA ELECTRIC VACUUM PUMP SUPPLY MAGNETIC DRIVE AUTOMATIC HOT WATER BOOSTER PUMP DIAPHRAGM PUMP STRUCTURE MAGNETIC DRIVE POOL PUMP FOR WATER

Product Description

Specifications
Performance curves

Model	Inlet x Outlet	Frequency (HZ)	Rated Capacity (L/min)	Rated Head (m)	Max. Capacity (L/min)	Max. Head (m)	Motor output (kW)
AMX-440	/in y	50HZ		10.5	240	12	A Q7
		60HZ	1 uu	11.5	240	13	U.O /
AMX-441	40×40	50HZ	150	15.5	330	19	0.75
		60HZ		15.5	330	19
AMX-542	50×40	50HZ		21	ARC	24.5
AMX-552	50×50	60HZ		21		25.5	I .O
AMX-542H	50×40	50HZ		26.5	250	27.5	1.5
AMX-552H	50×50	60HZ	1 uu	29	150	30.5
AMX-543	50×40	50HZ	ocn	26	510	31	2.2
AMX-553	50×50	60HZ	CSjXi	26		31
AMX-543H	50×40	50HZ	1 KA	32	300	34	Q 9
AMX-553H	50×50	60HZ		34	250	36
AMX-545	50×40	50HZ	250	31	500	35	3.75
AMX-555	50×50	60HZ		35		39
AMX-653		50HZ		16	cnn	20	O Q
	DO X OU	60HZ		16	ouu	20
AMX-655	ec 7 KA	50HZ	500	25	860	27.5	Q ~7C
		60HZ		25		28

 

AMX-662	65 x 65	50HZ	600	9	900	14	1.5
AMX-662	65 x 65	60HZ	500	10	850	15
AMX-663	65×65	50HZ	650	11	1050	17	2.2
AMX-663	65×65	60HZ	550	12	1000	18
AMX-665	65×65	50HZ	750	15	1230	21	Q 7
AMX-665	65×65	60HZ	660	17	1250	23	J. 1

 

Item	Size(mm)															Flange(mm)|
Model	A	B	B1	E G		H	H1	H2	H3	L	L1	L2	L3	N	M I	Inlet	Outlet I
AMX-440	87.5		1 Q&	54	137	225.5	130.5	70		430.5		30	138	12	22	40
AMX-441	105.5	WO	i yo	72	153.5	257.5	142.5	90		491.5							40
AMX-542(H)
AMX-552(H)					136	282.5		90		525							50
AMX-543(H)	91						162.5									50	40
AMX-553(H)		250	220	80					on		QQn	27	246	14	38		50
AMX-545						324.5			OU	592							40
AMX-555					1 QI												50
AMX-653	92				1 O 1	331	169	I Ozi		539						65	40
AMX-655										598						65	50

NOTICE: The full length of the pump will be different, it depends on the motor supplier and type.
 

Detailed Photos

FAQ

1. Q: Can I know more about your products?

A: Pls view our website:

2. Q: What’s your MOQ of this item? 
A: 1~2PCS(sample order is welcome. )

3. Q: What is the lead time? 
A: 15~30 days after receiving your payment, it depends on the pumps.

4. Q: What is the payment term? 
A: Normally T/T in advance or L/C at sight. Others like D/P, Cash, Credit Card

5. Q: What is the product’s warranty? 
A: The whole pump is warranted for 1 year, while the spare parts or wetting parts about the pump will be warranted for 3 months from the date of delivery.

6. Q: Are you a manufacturer or trading company? 
A: We are a manufacturer specializing in water pumps and other pumps for more than 20 years.

 

Screw Shaft Types and Uses

Various uses for the screw shaft are numerous. Its major diameter is the most significant characteristic, while other aspects include material and function are important. Let us explore these topics in more detail. There are many different types of screw shafts, which include bronze, brass, titanium, and stainless steel. Read on to learn about the most common types. Listed below are some of the most common uses for a screw shaft. These include: C-clamps, screw jacks, vises, and more.

Major diameter of a screw shaft

A screw’s major diameter is measured in fractions of an inch. This measurement is commonly found on the screw label. A screw with a major diameter less than 1/4″ is labeled #0 to #14; those with a larger diameter are labeled fractions of an inch in a corresponding decimal scale. The length of a screw, also known as the shaft, is another measure used for the screw.
The major diameter of a screw shaft is the greater of its 2 outer diameters. When determining the major diameter of a screw, use a caliper, micrometer, or steel rule to make an accurate measurement. Generally, the first number in the thread designation refers to the major diameter. Therefore, if a screw has a thread of 1/2-10 Acme, the major diameter of the thread is.500 inches. The major diameter of the screw shaft will be smaller or larger than the original diameter, so it’s a good idea to measure the section of the screw that’s least used.
Another important measurement is the pitch. This measures the distance between 1 thread’s tip and the next thread’s corresponding point. Pitch is an important measurement because it refers to the distance a screw will advance in 1 turn. While lead and pitch are 2 separate concepts, they are often used interchangeably. As such, it’s important to know how to use them properly. This will make it easier to understand how to select the correct screw.
There are 3 different types of threads. The UTS and ISO metric threads are similar, but their common values for Dmaj and Pmaj are different. A screw’s major diameter is the largest diameter, while the minor diameter is the lowest. A nut’s major diameter, or the minor diameter, is also called the nut’s inside diameter. A bolt’s major diameter and minor diameter are measured with go/no-go gauges or by using an optical comparator.
The British Association and American Society of Mechanical Engineers standardized screw threads in the 1840s. A standard named “British Standard Whitworth” became a common standard for screw threads in the United States through the 1860s. In 1864, William Sellers proposed a new standard that simplified the Whitworth thread and had a 55 degree angle at the tip. Both standards were widely accepted. The major diameter of a screw shaft can vary from 1 manufacturer to another, so it’s important to know what size screw you’re looking for.
In addition to the thread angle, a screw’s major diameter determines the features it has and how it should be used. A screw’s point, or “thread”, is usually spiky and used to drill into an object. A flat tipped screw, on the other hand, is flat and requires a pre-drilled hole for installation. Finally, the diameter of a screw bolt is determined by the major and minor diameters.

Material of a screw shaft

A screw shaft is a piece of machine equipment used to move raw materials. The screw shaft typically comprises a raw material w. For a particular screw to function correctly, the raw material must be sized properly. In general, screw shafts should have an axial-direction length L equal to the moving amount k per 1/2 rotation of the screw. The screw shaft must also have a proper contact angle ph1 in order to prevent raw material from penetrating the screw shaft.
The material used for the shaft depends on its application. A screw with a ball bearing will work better with a steel shaft than 1 made of aluminum. Aluminum screw shafts are the most commonly used for this application. Other materials include titanium. Some manufacturers also prefer stainless steel. However, if you want a screw with a more modern appearance, a titanium shaft is the way to go. In addition to that, screws with a chromium finish have better wear resistance.
The material of a screw shaft is important for a variety of applications. It needs to have high precision threads and ridges to perform its function. Manufacturers often use high-precision CNC machines and lathes to create screw shafts. Different screw shafts can have varying sizes and shapes, and each 1 will have different applications. Listed below are the different materials used for screw shafts. If you’re looking for a high-quality screw shaft, you should shop around.
A lead screw has an inverse relationship between contact surface pressure and sliding velocity. For heavier axial loads, a reduced rotation speed is needed. This curve will vary depending on the material used for the screw shaft and its lubrication conditions. Another important factor is end fixity. The material of a screw shaft can be either fixed or free, so make sure to consider this factor when choosing the material of your screw. The latter can also influence the critical speed and rigidity of the screw.
A screw shaft’s major diameter is the distance between the outer edge of the thread and the inner smooth part. Screw shafts are typically between 2 and 16 millimeters in diameter. They feature a cylindrical shape, a pointy tip, and a wider head and drive than the former. There are 2 basic types of screw heads: threaded and non-threaded. These have different properties and purposes.
Lead screws are a cost-effective alternative to ball screws, and are used for low power and light to medium-duty applications. They offer some advantages, but are not recommended for continuous power transmission. But lead screws are often quieter and smaller, which make them useful for many applications. Besides, they are often used in a kinematic pair with a nut object. They are also used to position objects.

Function of a screw shaft

When choosing a screw for a linear motion system, there are many factors that should be considered, such as the position of the actuator and the screw and nut selection. Other considerations include the overall length of travel, the fastest move profile, the duty cycle, and the repeatability of the system. As a result, screw technology plays a critical role in the overall performance of a system. Here are the key factors to consider when choosing a screw.
Screws are designed with an external threading that digs out material from a surface or object. Not all screw shafts have complete threading, however. These are known as partially threaded screws. Fully threaded screws feature complete external threading on the shaft and a pointed tip. In addition to their use as fasteners, they can be used to secure and tighten many different types of objects and appliances.
Another factor to consider is axial force. The higher the force, the bigger the screw needs to be. Moreover, screws are similar to columns that are subject to both tension and compression loads. During the compression load, bowing or deflection is not desirable, so the integrity of the screw is important. So, consider the design considerations of your screw shaft and choose accordingly. You can also increase the torque by using different shaft sizes.
Shaft collars are also an important consideration. These are used to secure and position components on the shaft. They also act as stroke limiters and to retain sprocket hubs, bearings, and shaft protectors. They are available in several different styles. In addition to single and double split shaft collars, they can be threaded or set screw. To ensure that a screw collar will fit tightly to the shaft, the cap must not be overtightened.
Screws can be cylindrical or conical and vary in length and diameter. They feature a thread that mates with a complementary helix in the material being screwed into. A self-tapping screw will create a complementary helix during driving, creating a complementary helix that allows the screw to work with the material. A screw head is also an essential part of a screw, providing gripping power and compression to the screw.
A screw’s pitch and lead are also important parameters to consider. The pitch of the screw is the distance between the crests of the threads, which increases mechanical advantage. If the pitch is too small, vibrations will occur. If the pitch is too small, the screw may cause excessive wear and tear on the machine and void its intended purpose. The screw will be useless if it can’t be adjusted. And if it can’t fit a shaft with the required diameter, then it isn’t a good choice.
Despite being the most common type, there are various types of screws that differ in their functions. For example, a machine screw has a round head, while a truss head has a lower-profile dome. An oval-its point screw is a good choice for situations where the screw needs to be adjusted frequently. Another type is a soft nylon tip, which looks like a Half-dog point. It is used to grip textured or curved surfaces.